THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Glass-Bedding a Sako 85
 Login/Join
 
One of Us
Picture of South Pender
posted
Has anyone on here glass-bedded a Sako 85? When I looked over the recoil-lug arrangement (a really goofy setup), it was hard to determine how one would bed it.


______________________________

The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt.
- Bertrand Russell
 
Posts: 167 | Location: Vancouver, BC Canada | Registered: 17 April 2015Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
The 85 has that separate steel plate screwed into the stock and that holds the receiver recoil lug, which is a small stud. I bed the plate first, then bed the receiver and first two inches of the barrel. And the rear tang. I use Acraglas gel; some use Devcon steel bed.
 
Posts: 17442 | Location: USA | Registered: 02 August 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia