Timney Low Swing or Bueller for Mark X Mauser

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/5071049632

28 November 2017, 19:46

Badboyz

Timney Low Swing or Bueller for Mark X Mauser

Has anyone every swapped in a Timney Low Swing or Bueller Safety or a Mark X Mauser. Did it require using a different shroud?

28 November 2017, 22:01

Badboyz

Looks like I can just install a shroud,safety, and firing pin assembly from a regular '98. Does that sound right?

29 November 2017, 01:15

Jim Kobe

You need to have a different bolt shroud

Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

29 November 2017, 01:19

Badboyz

Mr. Kobe,

Do you need the whole barreled action to install your two position, or can just the bolt be sent?

29 November 2017, 01:39

ramrod340

quote:
Looks like I can just install a shroud,safety, and firing pin assembly from a regular '98. Does that sound right?

I have provided it wasn't the speedloc bolt.

As usual just my $.02
Paul K

29 November 2017, 01:53

BaxterB

I know this is a “you asked for a steak house and I’m recommending Italian” answer, but consider the NECG 3-pos safety. After UPS made a mess of my shroud and 2 position wisner that Tom put on, I bit the bullet and got the NECG, which he is fitting now. The quality is first-rate and has a typical German engineering feel.