THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
OLD Octagon H&R 922
 Login/Join
 
One of Us
posted
Any of you long times 'smith's have the internal parts laying around?

I can't use anything for the round barrel type. They won't fit as they're different. I bought one of these guns and learned that lesson.

Need: trigger, cyl finger/spring and other little pieces. OR even a complete junker IF the parts are in it yet.

Had one as my first pistol as a kid that was stolen many years ago. Not long ago I picked one up with these parts missing and would like to put it together again.

Thanks, PM works good here.

George


"Gun Control is NOT about Guns'
"It's about Control!!"
Join the NRA today!"

LM: NRA, DAV,

George L. Dwight
 
Posts: 6060 | Location: Pueblo, CO | Registered: 31 January 2006Reply With Quote
One of Us
posted Hide Post
Try here https://www.gunpartscorp.com/g.../922-em-w-flat-mnspg
I had a guy bring me in one to work on and I never got it to work right. They can be a real pain to put back to together. I now refuse to even have one in the house altho there are smiths that will work on them but not me. Not enough patience. Good luck


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
 
Posts: 1513 | Location: Camp Verde, AZ | Registered: 13 December 2005Reply With Quote
one of us
posted Hide Post
Jack First out of Rapid City SD also is a good place to try for parts. Last I heard they still did not have a web site.

I understand your desire to get it shooting but you just might have to hang it on the wall and look at it.
 
Posts: 19701 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
They do now.

Jack First
 
Posts: 245 | Registered: 24 August 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia