THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Octagon barrel rear island sight-photos
 Login/Join
 
One of Us
posted
Please be easy on me. Remember that I am a home shop guy that only works on my own stuff. This is my last version of my many tries of an octagon rear sight. I still need to lower and hand work the rear sight insert.


I think it is ready to ship to James Anderson for wood work next week.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Butch
Looks like a great job.
What cal. is this rifle your working on?

Hal
 
Posts: 164 | Location: Montana | Registered: 09 December 2008Reply With Quote
One of Us
posted Hide Post
Butch that looks real good........I'll take two of them :-)
Ian
 
Posts: 133 | Registered: 08 August 2008Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
looks pretty good to me


Mike

Legistine actu? Quid scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10159 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
one of us
Picture of TC1
posted Hide Post
You are the man Butch. Looks fantastic. That along with the banded front sight is going to make for a knock out rifle!

Be sure and post a picture of the entire barreled action before it goes to James Anderson for the stock.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
One of Us
Picture of srtrax
posted Hide Post
Well, looks like the light bulb came on... Wink.
I think you done a nice job there, Is it soldered to the barrel. Keep us updated!


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
one of us
posted Hide Post
The muzzle looks like it is to the right. If so, the blade is in backwards. Wink Nice work on matching the barrel contour.
 
Posts: 2036 | Location: Roebling, NJ 08554 | Registered: 20 January 2002Reply With Quote
One of Us
posted Hide Post
It is chambered 6.5X47Lapua. The sight base is Force 44 soldered on. Kurt C, hell it may be backward. I guess that I need to turn it around.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
Picture of Big Earl
posted Hide Post
Excellent job Butch. Now a half band front sight? Keep it up and thanks for sharing.
 
Posts: 364 | Location: Sticks, Indiana | Registered: 03 July 2007Reply With Quote
One of Us
posted Hide Post
Big Earl,
No half band on the front. I did an octagon banded ramped front sight. The next pictures will have to come Jmaes Anderson,Gunmaker, as he has everything and will stock it. I will also ask him the touch up my FUps.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
quote:
I did an octagon banded ramped front sight.



a very tasteful accessory, and easy on the eyes, too. the rear sight is a proper compliment.
 
Posts: 3314 | Location: NYC | Registered: 18 April 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia