THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Barrel threads?
 Login/Join
 
olcrip
One of Us
Picture of olcrip
posted
Are the barrel threads the same pitch and diameter on push feed Model 70s as the CRF's? I have a push feed action coming and CRF barrel in the bucket. What are the dimensions on the two?

bewildered


Olcrip,
Nuclear Grade UBC Ret.
NRA Life Member, December 2009

Politicians should wear Nascar Driver's jump suites so we can tell who their corporate sponsers are!
 
Posts: 1800 | Location: River City, USA. East of the Mississippi | Registered: 10 February 2004Reply With Quote
Rhys
One of Us
posted Hide Post
They're both 1" 16 tpi but the breech is different on them.


Yes it's cocked, and it has bullets too!!!
 
Posts: 582 | Location: Apache Junction, AZ | Registered: 08 August 2003Reply With Quote
olcrip
One of Us
Picture of olcrip
posted Hide Post
quote:
Originally posted by Rhys:
They're both 1" 16 tpi but the breech is different on them.


Thanks for the quick response Rhys. I can correct the extracter cutout and set the shank back enough to make it work on the 300 Wby barrel. I have another Bbl from a MRC in 458 that won't have to be midified at all. Now I are happy like a hog in slop, thanks again. dancing


Olcrip,
Nuclear Grade UBC Ret.
NRA Life Member, December 2009

Politicians should wear Nascar Driver's jump suites so we can tell who their corporate sponsers are!
 
Posts: 1800 | Location: River City, USA. East of the Mississippi | Registered: 10 February 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia