THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
BRNO ring question
 Login/Join
 
one of us
posted
I have a zkk 600 in 270 that I want to mount a scope on but have had trouble with the standard cz mounts not clearing the pop up peep sight when in the down position. This caused me to almost run out of adjustment on my scope and isn't providing a very stable platform for the scope. Do Talleys or warnes have clearence for the sight or should I just file the sight down a bit to clear the mounts?

Brett
 
Posts: 152 | Location: Alberta, Canada | Registered: 27 April 2002Reply With Quote
one of us
posted Hide Post
The tallest Warne lever rings are about .725" from the dovetail to the bottom of the scope tube.

I have an unused set, if you need them.
 
Posts: 2036 | Location: Roebling, NJ 08554 | Registered: 20 January 2002Reply With Quote
one of us
posted Hide Post
Thanks for the offer kurt but that wont solve my problem.

The peep sight when in the down position potrudes enough above the flat to not allow full contact between the bases and the reciever. Maybe if I get someone to mill out a relief cut in the bottem of the ring base my problem would be solved.
 
Posts: 152 | Location: Alberta, Canada | Registered: 27 April 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia