THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Help Needed on Electrical Wiring
 Login/Join
 
One of Us
Picture of dpcd
posted
I hate electricity; or at least some aspects of it. My band saw wiring got pulled out of the motor box and I have no idea how to put it back. If a good electrician can help me, I would appreciated it.
Here is what I have;
Red, black and green wires coming from the 110 volt plug.
Red and black wires going into the cut off switch.
Red, black white and yellow wires going into the motor.
The only thing I know is that the green wires are grounded and the one from the switch is still connected to the motor body.
Help.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
I would think black, white and green in a 110 set up. Are you certain you have 110 input? Do you have a volt meter? Look at the motor, it should tell you HP, voltage , phase, etc

BTW, your pkg is on it's way
 
Posts: 3663 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
Diagram on the inside box cover??


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
posted Hide Post
What is the make and model, should be something on the web to show wiring??


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
 
Posts: 1513 | Location: Camp Verde, AZ | Registered: 13 December 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I been plugging it into 110 volts for 30 years; so it is definitely 110.
Thanks for the update. too.
Yes I have a volt meter.
It's an Enco.
No, and no I can't find the wiring diagram on the internet.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
I think you may have a some thing like this.
https://i0.wp.com/wisedesign.o...esize\u003d500%2C368
 
Posts: 1301 | Location: N.J | Registered: 16 October 2004Reply With Quote
One of Us
posted Hide Post
maybe here http://bandsawmanuals.com/


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
 
Posts: 1513 | Location: Camp Verde, AZ | Registered: 13 December 2005Reply With Quote
One of Us
posted Hide Post
This one is better for you.
http://lumberjocks.com/topics/5432
 
Posts: 1301 | Location: N.J | Registered: 16 October 2004Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I have bare wires and 3 plastic wire nuts. The green wires have ring terminals so I know they go to ground.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
Connection on the motor.
Black and yellow to one side of the 110
Red and white to the other side of the 110
The 110 is coming from the switch.
Pictures would help, dam photobucket.
 
Posts: 1301 | Location: N.J | Registered: 16 October 2004Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Dave is helping me via text where I can send him pictures. thanks.
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
I don't think you are too far from me, if you and Dave can't get it fixed let me know.
 
Posts: 481 | Location: Midwest USA | Registered: 14 November 2008Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
AR guys are the best on any forum; no question about it.
Dave told me how to wire up back up, (seemed easy for him (he used to teach it) but electrons are like rocket surgery to me). Got it wired back up and motor put back on; runs better than ever.
Thanks to all who helped.
Case closed. (The pulley cover I mean)
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
Now can somebody help me fix my infrared sauna Big Grin
 
Posts: 2059 | Location: Mpls., MN | Registered: 28 June 2014Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I can't even fathom what that is....
 
Posts: 17374 | Location: USA | Registered: 02 August 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia