I just put together an AR-15 lower starting with a stripped lower and I installed a JP trigger. The instructions with the JP trigger says to secure the adjusting screws with Loctite 271 which is meant to hold screws in place FOREVER with little chance of ever removing them if I understand it correctly.

I'm wondering if using low or medium strength Locktite (222 or 242) would be a better idea. In addition to locktite on the threads I would put fingernail polish on the screw as well so I could easily tell if it had moved.

What say you all.

I tend to agree with you.

Use the blue stuff it will hold it and if you have to take it apart later you can with little problems.Good Luck