Where would I began to look for a PREMIUM chrome molly, 1/10 twist....338 barrel in an 1.5" diameter, full length barrel for a 24" finished length. Would it be a special order or does anyone make these in this configuration readily.

They should have an unturned barrel blank that should work.

Depending on who you get it from,it might be somewhat cheaper because they do not have to do much work on it.

http://riflebarrels.com/lilja-straight-taper-list/

You should be able to find what you need here.

Most battle makers have 1.5 stock no problem. . Just a couple bucks. You emphasized premium .. I expect you have a personal list of makers. Call them.

2 inch barrel stock is another issue

Sorry for not getting back...busy.
Thanks for the info...I'm thinking 1.5" is big enough for next project...1.750 better?

Steve,

I'd call Douglas and ask for the shop. They've helped point me in the right direction in the past. Or if you want to "settle" for SS. Clip from Douglas's.
*We are now making 1-1/2" diameter x 30" long barrels in stainless. These barrels are available in 6mm, 6.5mm, 7mm, 30cal and 338. These are basic barrels. Price is $415.00 with maximum discount of 20% to dealers.

Steve, back a few years ago I only found one at Lilja in CM. SS was easy and I called all of them.

Thanks guys...Chrome molly. I'll make some calls.