THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
looking for a smith with a 338/375 Ruger reamer
 Login/Join
 
One of Us
Picture of Cold Trigger Finger
posted
Looking to have my 338 Win Mag reamed to 338/375 Ruger with at least a full caliber length parralel sided throat and a shallow angle leade. Also need the shank cut and rethreaded and screwed onto my action.
Thank you
Glen.


Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
 
Posts: 1934 | Location: Eastern Central Alaska | Registered: 15 July 2014Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia