THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Kimber Montana blind magazine to floorplate conversion

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Kimber Montana blind magazine to floorplate conversion
 Login/Join
 
one of us
posted
I've never been a blind magazine fan. Just personal preference.

I have converted several Rem 700 ADL's to BDL's without a problem

I have a Kimber Montana that I would like to convert. I really don't know the Kimber platform like I do the Remington.

Is there anyone out there that may have experience with such a conversion or offer some guidance on things to look out for or be careful of.


NRA Life Member
NRA Charter Member Golden Eagles
 
Posts: 899 | Location: South Bend, Indiana | Registered: 11 August 2003Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
My experience is that Kimber is reluctant to sell parts for such a project.

What model and chambering do you have that is in a blind magazine?


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
My guidance is to train and practice with your equipment and learn how to employ them under field conditions. Something that I find Americans loathe to do: train.
I have many rifles with floor plates but I never open them.
If you really want a rifle with a floor plate; trade yours for one.
 
Posts: 17396 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
I love a blind magazine

Lighter rifle, warmer to cary in that area and they will never fail you

BTW......Kimber doesn't sell parts and they don't make a stainless floor plate and trigger


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Kimber Montana blind magazine to floorplate conversion

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia