THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Source for 20-gauge shotgun barrel blanks?
 Login/Join
 
one of us
Picture of loud-n-boomer
posted
I want to make an extra set of 20-gauge shot barrels for one of my shotguns and cannot find a source of barrel blanks. Anybody have a source? My plan is to machine a new monoblock and all new forend metal. If that turns out ok, the next project will bushing the firing pins and making a set of rifle barrels.


One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx
 
Posts: 3858 | Location: Eastern Slope, Colorado, USA | Registered: 01 March 2001Reply With Quote
One of Us
Picture of speerchucker30x378
posted Hide Post
Hastings used to sell barrel blanks. You would have to call them to see if they still do. Lothar Walther also used to produce blanks in all gauges. Again, you would have to call them for pricing and distribution in the USA.

http://www.lothar-walther.com/442.php

http://www.bulldogbarrels.com/barrels.php


When I was a kid. I had the stick. I had the rock. And I had the mud puddle. I am as adept with them today, as I was back then. Lets see today's kids say that about their IPods, IPads and XBoxes in 45 years!
Rod Henrickson
 
Posts: 2542 | Location: Edmonton, Alberta Canada | Registered: 05 June 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
numrich
 
Posts: 17384 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
Picture of loud-n-boomer
posted Hide Post
Tried Numrich and no-go.


One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx
 
Posts: 3858 | Location: Eastern Slope, Colorado, USA | Registered: 01 March 2001Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
Did you see this? L. C. Smith blank


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
one of us
Picture of loud-n-boomer
posted Hide Post
I am hoping to get modern steel tubes that if all works out, I can have screw-in chokes installed in.


One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx
 
Posts: 3858 | Location: Eastern Slope, Colorado, USA | Registered: 01 March 2001Reply With Quote
One of Us
posted Hide Post
there is a company in Oregon that makes them. perhaps www.thegunworks.com. They advertise in Muzzleloader Magazine that they are the master distributor for ORegon Barrel Company for smoothbore OR rifled barrels from .30 caliber up to 2-bore, lengths up to 35".

Rich
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
Picture of BaxterB
posted Hide Post
Half moon?
 
Posts: 7828 | Registered: 31 January 2005Reply With Quote
one of us
posted Hide Post
I was in the Brux barrel shop a few weeks ago and noticed a bunch of 20ga barrel blanks laying in the back of the shop. Don't know if it was just an experiment or what and I forgot to ask them about them as they looked like very good blanks for a SxS type application. You might call them up and ask about them. (608)592-3324. They looked fairly OLD, past projects kind of thing.


Shoot straight, shoot often.
Matt
 
Posts: 1187 | Location: Wisconsin | Registered: 19 July 2001Reply With Quote
one of us
Picture of loud-n-boomer
posted Hide Post
Thank you, Matt.


One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx
 
Posts: 3858 | Location: Eastern Slope, Colorado, USA | Registered: 01 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia