one of us
| Mostly the alloying elements in the steel .It can be reduced bit in the bluing process but I'd leave it alone ! |
| |
One of Us
| The odd brown to dark plum brown is usually associated with vanadium in the steel. Some times it can be turned black blue by shocking between hot and cold tanks and by taking the tanks to over 300 degrees. Some times there is no turning them other than to rust blue them. Many people have told me over the years that adding potassium to the tanks would solve the problem. I'd have to call bullshit on it. I even substituted the sodium nitrate with potassium nitrate for a year when I was doing Weatherby warranty. It never did a damned bit of good. Rust blue is the only way to turn them blue black. The down side is you can not have a high gloss finish as the process etches the steel.
When I was a kid. I had the stick. I had the rock. And I had the mud puddle. I am as adept with them today, as I was back then. Lets see today's kids say that about their IPods, IPads and XBoxes in 45 years! Rod Henrickson
|
| Posts: 2542 | Location: Edmonton, Alberta Canada | Registered: 05 June 2005 |
IP
|
|
One of Us
| I had a late 80s vintage M70 .300 H&H that had a plum colored bolt handle, cocking piece, and safety. |
| |
one of us
| Silicon is added to a investment cast steel part to make the steel flow better.
This is why the od Ruger flat top Blackhawks have the purple colored frames, that was in the old days they did not understand how much silicon was too much
However to much silicon in the casting makes it hard to hot blue, hence a purple color as the years go by.
I know the cocking piece and safety lever are investment cast on those M70's.
JW |
| Posts: 1493 | Location: Chehalis, Washington | Registered: 02 April 2003 |
IP
|
|
One of Us
| When I pointed out to my dad that the 1962 Rem 700 ADL bolt handle that I had just received for my 14th birthday had a purple-ish tinge to it that differed from the rest of the rifle, he merely stated that I didn't know what I was talking about. |
| Posts: 1421 | Location: WA St, USA | Registered: 28 August 2016 |
IP
|
|
One of Us
| Funny story Ray... Was actually my son who asked me why my gun had purple parts on it during a range trip that made me think about changing them. I should have used your Dad's line.
Appreciate all the responses. Sounds like live with it or refinish them in some type of coating. |
| Posts: 139 | Location: North Carolina | Registered: 11 November 2007 |
IP
|
|
One of Us
| I have early Ruger 77s with purple receivers; I like the color so nothing needs to be done. |
| |
One of Us
| I have had this happen too on Early model 70 Classics. But they didn't start out that way. when I got them they were perfectly black, and over the years they turned purple. |
| |