The Accurate Reloading Forums
Who to Free Float and Bed My Mauser??

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/4401086642

25 October 2018, 02:16
MopaneMike
Who to Free Float and Bed My Mauser??
Who can I get to free Float and Glass bed my new to me Pre War Mauser 7X64

She is built in the Classic Alpine Design on what appears to be a slick KAR 98 action along with DST and Claw Mounted 4X Scope. Somewhere along in time she aquired a shotgun waffle type pad I'd like to get rid of and install maybe a horn butt plate or something similar..

Thank you.


MopaneMike
25 October 2018, 02:47
Duane Wiebe (CG&R)
I'd think twice before "glass bedding and free floating" You will certainly decrease the value . How does it shoot now?
25 October 2018, 03:58
MopaneMike
About 4" @100yd.
A previous owner also tried to relieve fore end pressure, looks like he used a spoon trying to scoop it out..


MopaneMike
25 October 2018, 05:56
p dog shooter
Doesn't sound like the collator value is there any more.

Should be a fairly straight forward job.
25 October 2018, 19:37
MopaneMike
Duane,

Sent you a PM..

Thank you.

Mike


MopaneMike
25 October 2018, 23:55
MopaneMike
Back to my original question..

Still looking for a smith... Unfortunately for me Duane is too busy..

Thanks All


MopaneMike
26 October 2018, 00:40
bluefish
how about our friend, dpcd?
26 October 2018, 01:00
Duane Wiebe (CG&R)
Hope I didn't seem "aloof" I try to be accommodating, but think it's best to be up front with delivery times
26 October 2018, 03:01
MopaneMike
No worries Duane... I'd rather be told up front than being put on hold forever..


MopaneMike
26 October 2018, 03:15
MopaneMike
quote:
Originally posted by bluefish:
how about our friend, dpcd?


Thanks Bluefish..

I just sent him a PM... Hehehe... I also mentioned he had you to thank for throwing him under the bus. lol


MopaneMike
26 October 2018, 05:29
Fjold
Check with TooManyTools here on AR. John's done good work for me and my brother.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

02 November 2018, 00:19
MopaneMike
Bump....

I'm still on the hunt for a smith who can take care of this for me..

Thanks all

MM


MopaneMike
02 November 2018, 00:25
dpcd
Unfortunately I have too much to do at this time; but thanks for considering me. You too blue.
02 November 2018, 01:44
montea6b
Not sure how handy you are, but this is a pretty common DIY project. Since you aren't building a bench rest rifle, accuracy already sucks, and no real collector value, this would seem like a great opportunity to give it a try.
02 November 2018, 04:35
Blacktailer
quote:
Originally posted by montea6b:
Not sure how handy you are, but this is a pretty common DIY project. Since you aren't building a bench rest rifle, accuracy already sucks, and no real collector value, this would seem like a great opportunity to give it a try.

My thoughts exactly. I built a milsurp Mauser and did everything the OP is asking myself. Shoots sub MOA too.


Have gun- Will travel
The value of a trophy is computed directly in terms of personal investment in its acquisition. Robert Ruark
02 November 2018, 07:06
Mike_Dettorre
try these guys

http://www.lonpaulcustomguns.com/html/contact.html

http://brownprecision.com/contact-us/

Dean Wilkerson Gunsmithing van nuys, ca


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
02 November 2018, 23:47
AnotherAZWriter
quote:
Originally posted by montea6b:
Not sure how handy you are, but this is a pretty common DIY project. Since you aren't building a bench rest rifle, accuracy already sucks, and no real collector value, this would seem like a great opportunity to give it a try.


Bedding a gun to shoot well is an easy DIY project, but anyone looking at my rifles could easily tell the difference between my jobs and the professional ones. "Oh that divot on my .338 Win Mag? Dremel tool slipped..." etc etc


Don't Ever Book a Hunt with Jeff Blair
http://forums.accuratereloadin...821061151#2821061151

03 November 2018, 00:59
mlfguns
You have a pm.
03 November 2018, 17:54
df06
Jim Kobe in Bloomington Mn does that kind of work.


NRA Patron member
03 November 2018, 22:23
Russ Gould
Did you check to see that the action screws were tight? If not then try tightening first. And how is the bore? If poor then bedding is not going to solve your problem. Ditto crown.


Russ Gould - Whitworth Arms LLC
BigfiveHQ.com, Large Calibers and African Safaris
Doublegunhq.com, Fine English, American and German Double Rifles and Shotguns
VH2Q.com, Varmint Rifles and Gear