THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Bolt Action ID
 Login/Join
 
One of Us
posted
Anybody know the story on these actions? Almost looks like a small ring.


 
Posts: 603 | Location: Louisiana USA | Registered: 24 August 2007Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
I dunno but they look cool


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10162 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
An American Mauser? I want one!

Please, more photos and story of where you got it...
 
Posts: 1138 | Location: Washington State | Registered: 07 September 2005Reply With Quote
one of us
Picture of Fjold
posted Hide Post
Federal Ordnance in El Monte, CA used to make a lot of M14 (M1A) and M1 Garand copies along with some other "military style" rifles.

I think that they went out of business around 1992 or so.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12747 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I remember these from Fed Ord; they didn't make them, they just ground off all the military markings (and the case hardening) not that that is a bad thing, and re-rolled new markings on them. That is why the ring is between a large and small ring. Started out life as a large 1.4 inch, ring 98 Mauser from who knows where.
 
Posts: 17371 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
 
Posts: 222 | Location: Central Iowa | Registered: 16 May 2009Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
Probably will rockwell about 15. Better have it tested. Fed Ord made a bunch of crappy 1903 springfield actions back in the early 70s.



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
posted Hide Post
The markings on the bolt are identical to my brazilian 1908. The action is marked 08/85 so maybe it started out as a 1908.
 
Posts: 603 | Location: Louisiana USA | Registered: 24 August 2007Reply With Quote
One of Us
posted Hide Post
Go to this url and scroll down to the bottom. Tells all.

http://www.surplusrifleforum.c...=79806&view=previous

Jerry Liles
 
Posts: 531 | Location: Louisiana | Registered: 01 January 2010Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia