The Accurate Reloading Forums
Re: REMINGTON PSS HELP

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/430105801

05 February 2004, 18:05
gunsdogs
Re: REMINGTON PSS HELP
35 at that depth how much bullet is left in the case? Would backing off say 10-15 thousands get you a bullet dia in the neck? My sierra software says 2.8" max for the 168 in the 308, but of course I only use that as a guide and seat 10-15 thousands off the lands for most loads. Rich
05 February 2004, 17:52
35WLN
I have a brand new in the box PSS. I used the stoney point OAL gauge on seirra 168 match kings and was supprised to find out that I can't seat the bullets out to touch the lands and still keep a bullets diameter in the case neck. Should I take it to a smith and have him cut a thread and try again? This is a new gun and I have never had a problem like this. BTW the OAL to touch the lands is 2.945.
06 February 2004, 12:13
35WLN
Thanks for the replies. I didn't want to shoot it if it wasn't right, but it sounds like it is going to be OK. BTW what is your OAL on the 168s?
06 February 2004, 13:10
OutlawMk26
2.790 works for me
06 February 2004, 01:12
OutlawMk26
how does it shoot with ammo loaded to fit the magizine?
i cannot reach the lands with 168s in my PSS but it still shoots sub 1/2moa 5shots out to 500yds. that is as far as i've shot it. 175s will reach but lands but i cannot get them to shoot better than 3/4moa.
06 February 2004, 01:17
Cold Bore
Quote:

how does it shoot with ammo loaded to fit the magizine?
i cannot reach the lands with 168s in my PSS but it still shoots sub 1/2moa 5shots out to 500yds. that is as far as i've shot it. 175s will reach but lands but i cannot get them to shoot better than 3/4moa.




Exactly.

Try it out as-is, you may be surprised.

And OutlawMk26, your 168 vs 175 experience is the same as mine. Everybody told me I was crazy for not shooting 175's, but they just don't shoot as well as 168's, out of my rifle.