THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Re: Follower Spring
 Login/Join
 
mix3006
one of us
Picture of mix3006
posted
Thank's Jim.
 
Posts: 191 | Location: Wollongong NSW Australia | Registered: 25 August 2004Reply With Quote
T.Carr
Moderator
Picture of T.Carr
posted Hide Post
Wisner's
 
Posts: 5338 | Location: A Texan in the Missouri Ozarks | Registered: 02 February 2001Reply With Quote
Jim Kobe
One of Us
posted Hide Post
I do believe Jim isner sells a bigger spring. Contact him at jwisner@quik.com
 
Posts: 5533 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
mix3006
one of us
Picture of mix3006
posted Hide Post
I'm having an dropped magazine floor plate installed on a mark x action (4 down)and was wondering if the standard follower spring will be sufficiently strong enough to allow the last round to be fed onto the bolt.Is there any alternative for a longer spring if it is required.Thanks.
 
Posts: 191 | Location: Wollongong NSW Australia | Registered: 25 August 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia