THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
M96 Bolt ?
 Login/Join
 
One of Us
Picture of yumastepside
posted
Is this an M96 bolt ??

I've been offered this bolt for $50 and was told it's from a '96 Mauser but most 96's I've seen or own have a longer firing pin and the raised piece at the back...any ideas ?



If its not a '96, would it fit a Carl Gustav 96 Swede ?

Roger
 
Posts: 1133 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
one of us
posted Hide Post
Looks like a Chilean M95 bolt. No guide rib. Someone drilled a divot in the safety and put a red dot in it. For a complete bolt for $50 I'd buy it and run like I stole it. It might work in a Swede.
 
Posts: 4054 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
One of Us
Picture of Timan
posted Hide Post
No,
A 96 bolt has a guide rib on it.



 
Posts: 1240 | Location: Satterlee Arms 1-605-584-2189 | Registered: 12 November 2005Reply With Quote
One of Us
posted Hide Post
As stated it is a Chilean 1895.

It will not work in a Swede 96, as the Swede 96 is slightly longer than a 93/95 and unfortunately is not interchangeable.


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.
 
Posts: 1568 | Location: Ohio | Registered: 06 June 2010Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post
Cheers to all...I'll pass on it...thanks

Roger
 
Posts: 1133 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia