THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Williams bottom metal
 Login/Join
 
one of us
posted
I have a new set of Williams Oberndorf bottom metal that when latched leaves a gap between the frame and the floor plate. It almost appears that the latch itself was milled short. I've had others and this is the first that is like that.

It took me several months to import so I have no interest in sending it back.

Any thoughts on correcting the problem?

Thanks.
 
Posts: 2659 | Location: Southwestern Alberta | Registered: 08 March 2003Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
Pull the latch lever out, weld on it a bit, file to fit.


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
Take some measurements of the floor plate and send them to Williams. Maybe they could send you a replacement floorplate without the export/import issues of the complete triggerguard.


______________________________
"Truth is the daughter of time."
Francis Bacon
 
Posts: 5052 | Location: Muletown | Registered: 07 September 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia