Smith for old custom rem model 30 D/T &scope bases
I have a old customized Remington model 30 Enfield 3006. Its a 1927 serial# and it has a side mount and old weaver scope that is worthless. The scope has to be disasembeled and slid into this old side mount.
Any recomendations on a gunsmith on the west coast or montana/idaho for Drill and tapping and custom bases ??
'
'So I can mount a modern scope and use this old customized model 30. It has a Custom stock and metal work.
Its been sitting for years waiting for me to refurbish it . Its a old "Custom " that needs a modern scope mounting system.
I need some contact phone numbers,,, advice. If you prefer please PM me
Thanks Rick
31 May 2004, 11:48
M1TankerScott Green in Blackfoot does excellent work.
Scott Green
454 West Highway 26
Blackfoot, Idaho 83221
1-208-785-7722
He has a website but I am not sure of the link.
31 May 2004, 12:13
ScrollcutterJames Dubell
509-684-5855
Eastern Washington. Top flight work.
31 May 2004, 12:13
fla3006I also recommend Scott Green.
www.idahorifleman.com31 May 2004, 16:34
TGetzenWith the cost of having custom receiver mounts and the prospect of extra holes left in the side of the receiver, why not look in to the EAW side mounts offered by NECG? It would be something a little different and IMO very cool - a low scope that allows you to see your irons too. Not cheap, but neither are custom bases...
www.newenglandcustomgun.comClick on "Scope Mounts" then "Special Mounts"
Todd
Weaver makes bases for the remington model 30. All you will need is the D&T. Should be very straightforward for any competent smith.
Good shooting, Weagle
01 June 2004, 03:28
vigillinusThere is always, very expensive, the Griffin & Howe sidemount which G&H can make so as to use the existing holes in the side of your receiver. The price is so high that they have fallen out of popularity but they are excellent and they leave the top of the rifle perfectly clear for iron sight use.