THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Just finished, 300 win mag Left Hand
 Login/Join
 
One of Us
posted
This one is on a Sako LH L691 Action, 300win mag. Enjoy.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
Nice Job! What did you put on the stock for a finish?
 
Posts: 340 | Registered: 11 June 2003Reply With Quote
One of Us
posted Hide Post
Damn,
You're getting a lot of practice before you get to mine. Very good job Buddy!
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
Picture of Fjold
posted Hide Post
Beautiful gun. I really like the fact that it is built with the bolt on the "correct" side.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12821 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
One of Us
posted Hide Post
Purty !I like the wood figure.Good Luck
 
Posts: 1371 | Location: Plains,TEXAS | Registered: 14 January 2008Reply With Quote
One of Us
Picture of MJines
posted Hide Post
Very nice. That wood is beautiful.
Congrats to the lucky owner.


Mike
 
Posts: 21966 | Registered: 03 January 2006Reply With Quote
one of us
Picture of TC1
posted Hide Post
That's nice. thumb

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
one of us
Picture of Charles_Helm
posted Hide Post
quote:
Originally posted by TC1:
That's nice. thumb

Terry


What he said.
 
Posts: 8773 | Location: Republic of Texas | Registered: 24 April 2004Reply With Quote
One of Us
posted Hide Post
Jim:

That is one beautiful rifle. Great work
Longshot
 
Posts: 322 | Location: Youngsville, NC | Registered: 23 April 2004Reply With Quote
One of Us
posted Hide Post
i handled this yesterday and the pictures don't do it justice. i was at jims place to take that beautiful #1 to rebarrel it with a half octagon. he promised me that it would be ready next friday Winkor something like that lol
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
One of Us
Picture of richj
posted Hide Post
beautiful stock. nice mounts too.

Rich
 
Posts: 6553 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by richj:
beautiful stock. nice mounts too.

Rich


Mounts are for the Talley rings. I made them from scratch, VERY low profile.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
Picture of cmfic1
posted Hide Post
As always Jim...Beautiful


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia