THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Remington 700 Ti ?????
 Login/Join
 
One of Us
posted
I was in a local pawn shop and looked at a Remington 700 Ti in 300 SAUM.

In examining the bolt, I noticed the bolt face had some marks and scratches .

Is this a problem, or from normal use ?

Anything else I should look for ?
 
Posts: 110 | Location: Idaho | Registered: 11 February 2004Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by billd:
I was in a local pawn shop and looked at a Remington 700 Ti in 300 SAUM.

In examining the bolt, I noticed the bolt face had some marks and scratches .

Is this a problem, or from normal use ?

Anything else I should look for ?


Depends on what the the marks and scratches look like. Remember, the bolt face comes into contact with a brass cartridge case and a primer. By itself the brass case wouldn't cause any damage unless it was imbedded with something. But marks from leaking primers, tools or other types of abrasives might be a concern. What would be helpful would be to include a clean, sharp close up of the bolt face.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia