one of us
| Lets see pictures. Maybe someone screwed a jc higgins barrel on it. |
| Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002 |
IP
|
|
one of us
| Wouldn't doubt it. Last auction I went to they screwed a santa barbara barrel onto a Mauser banner action & dropped em into some kinda stock. Both parts still had the red rouge on them that the now deceased owner used to remove the blue with. I wanted the action but the uninformed bid it way too high. I may still have bought it had it not been polished. It didn't look like the surface could be straightened without removing the banner. What a shame! One of the Guns and Ammo editors just gave me a reprint of the July 2004 issue which has an article on his Dad's JC higgins model 50 in .270 Win. Aut vincere aut mori |
| Posts: 4865 | Location: Lakewood, CO | Registered: 07 February 2002 |
IP
|
|
one of us
| I've owned 2 M51s, both had FN Supreme actions rather than the Deluxe like the M50s. Sounds to me like someone robbed the FN action and replaced it with an Argentine or screwed a Higgins barrel on an Argentine sporter.
NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS. Shoot & hunt with vintage classics.
|
| Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002 |
IP
|
|
One Of Us
| quote: Originally posted by fla3006: I've owned 2 M51s, both had FN Supreme actions rather than the Deluxe like the M50s. Sounds to me like someone robbed the FN action and replaced it with an Argentine or screwed a Higgins barrel on an Argentine sporter.
Ditto... never seen a "JC Higgins" 51 with anything but an FN action... |
| |
new member
| Is there any way to tell if an action has been heat treated and if it hasn't is there a safety concern with this gun? The person that built this gun put some money into it and it looks good. The bolt has a buehler type shroud on it, the saftey has been modified and a timney trigger installed. The metal work and finish on this gun is very good but I'm concerned about the action. |
| Posts: 6 | Location: LAYTON,UT | Registered: 31 March 2005 |
IP
|
|
one of us
| If you've shot, and it hasn't blown up in your face, it should be fine. Unless you plan on handloading your reloads way above normal. Use factory ammo, not the High Energy loads, or handload prudently and it should be fine. If your that concerned about it, have a Gunsmith look it over. Or, send it to me to have it desposed of properly All of the JC Higgins I've owned shot well, so if that gun was put together right, it should to. They had good barrels... |
| |
One of Us
| I doubt very seriously if it will "blow up in your face". That being said, what you should do is shoot it, and enjoy it, but at the same time be on the lookout for signs of lug setback, which if extreme, can be dangerous. Lug setback causes excessive headspace, which can cause extraction problems, etc. etc. |
| |