The Accurate Reloading Forums
What size barrel band and front sight to buy

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/400109397

10 January 2008, 13:30
ShortandFat
What size barrel band and front sight to buy
To all those who have done this before

I have measured the spots I want to put a NECG ramped front sight band and sling barrel band on my new 458 barrel

Half inch from the tip of the barrel the measurement is .775

NECG have a ramped front sight band with an Internal Diameter of .768 and another at .787, so which one do I order

Where I want to put the barrel band for the sling measures in at .880

Brownells have talley bands measuring about .865 and another at .890 so which one should I order here

I'm only aski this because I'm not sure if I should be allowing a few thous for some sweating material under the bands

Thanx

regards
S&F
10 January 2008, 15:38
Westpac
quote:
Originally posted by ShortandFat:
Half inch from the tip of the barrel the measurement is .775

NECG have a ramped front sight band with an Internal Diameter of .768 and another at .787, so which one do I order

Where I want to put the barrel band for the sling measures in at .880

Brownells have talley bands measuring about .865 and another at .890 so which one should I order here



Buy as close to size as you can without going over and either stretch the band to size using a tapered mandrel (an old gun barrel), or, place it in the lathe, set the compound to the desired taper and bore it too size.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.