THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
open bolt face pre -64 win
 Login/Join
 
one of us
Picture of RMiller
posted
Looking for some thoughts/experience with opening the bolt face on a pre-64 308 win.
From standard case to magnum case (338 win). Is there enough metal, being a tapered bolt?
 
Posts: 9823 | Location: Montana | Registered: 25 June 2001Reply With Quote
one of us
posted Hide Post
Easy job, I do it all the time. Takes a lathe and a steady rest. Email me if you need more info. Regards, John (star@olypen.com)
 
Posts: 1055 | Location: Real Sasquatch Country!!! I Seen 'Em! | Registered: 16 January 2001Reply With Quote
one of us
posted Hide Post
John Ricks will do you a good job and you will have to open or replace the bottom metal.

------------------
Ray Atkinson

ray@atkinsonhunting.com
atkinsonhunting.com

 
Posts: 42210 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
Picture of RMiller
posted Hide Post
Is bottom metal the magazine, magazine spring and follower?
 
Posts: 9823 | Location: Montana | Registered: 25 June 2001Reply With Quote
one of us
posted Hide Post
In your case that would be correct, if you purchase bottom metal it would not include spring and follower...but your spring and follower will work in any bottom metal..

Bottom Metal is an industry term for the magazine of a bolt action rifle.

------------------
Ray Atkinson

ray@atkinsonhunting.com
atkinsonhunting.com

 
Posts: 42210 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia