Need help, info on cz 416 rigby barrel

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/38610615

22 October 2003, 07:31

RNS

Need help, info on cz 416 rigby barrel

What I would like to know is the demensions on a factory Cz 416 Rigby barrel and the stock demensions. Does anyone have one they have pulled off that they don't want. RNS

27 October 2003, 18:12

RNS

someone has to have one RNS

28 October 2003, 07:36

KMuleinAK

RNS - I have a CZ 550 magnum barrel in 416 Rigby plus the stock - send me an email if you are interested in purchase, I have no need for them as the action went to the feedlot and became a 510/460 wby improved - KMule

28 October 2003, 10:38

KMuleinAK

jeffeosso - return PM sent to you - KMule

28 October 2003, 10:48

RNS

Kmule
I sent you an email and my cunfusser went funny. Let me know if you get it. RNS

28 October 2003, 15:47

KMuleinAK

RNS - hope this photo will help with dimensions

28 October 2003, 15:51

KMuleinAK

RNS - the barrel shank, right next to the threads, measures 1.220" / the barrel, just before the lower lug and the rear sight fixture, measures .943" / the barrel just beyone the lower lug and the rear sight fixture (toward the muzzle) measures .865" / the barrel just before the front sight band measures .695" - a fairly light contour for a 416 Rigby - in the above photo, the #'s below the stock are the approximate inside dimensions of the inletting for the barrel - hope this helps - KMule