The Accurate Reloading Forums
Dimensions needed?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/379104786

15 June 2007, 22:47
van
Dimensions needed?
I,m sure one of you talented people would have the Barrel thread dimensions for a Sako L461 action? thank you
16 June 2007, 00:49
Westpac
If you have the action it's a breeze to figure it out. If you will provide me the minor diameter of the action, the thread pitch, the distance from the face of the receiver to the nose of the bolt with the bolt held as far forward as possible, I will give you the thread and tennon dimensions.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
16 June 2007, 04:35
van
Westpac, if i had the action,i could do all that myself.Thanks for the help anyway.
16 June 2007, 04:48
piniongear
I thought I had that, but when I checked it turns out that what I have is for a Sako L-46, not a 461. Sorry.........pg
quote:
Originally posted by van:
I,m sure one of you talented people would have the Barrel thread dimensions for a Sako L461 action? thank you

16 June 2007, 05:02
ramrod340
Well per "Bolt Action Rifles" they show the L46 and L461 as the same overall length and Ring Dia with only main difference being bolt travel.

If that is the case the the thread dia is .855" .845" long and 16TPI.

Take this with a huge grain of salt.


As usual just my $.02
Paul K