Limbsaver Recoil Pad

21 November 2003, 17:34

I've seen ads for these all over, and I'm wondering if they work as well as advertised. I'd like to put one on my CZ 550 in 9.3x62, but I'd like an opinion from my resident panel of experts first. [Smile]

Any experience or advice will be appreciated.

[ 11-21-2003, 08:36: Message edited by: Trailblazer ]

22 November 2003, 09:09

TC1

I put one on my T/C Omega and it works great. The M/L is very light and the recoil pad is hard. With a magnum charge it was kinda painful to shoot before, but now with the Limbsaver pad it's very comfortable, no pain at all.

One great thing about adding the pad to that rifle is the LOP was a little short for my taste. The Limbsaver pad is about 1/4" thicker and after it was installed the rifle fit me much better. Of coarse if your rifle fits now this could be a problem.

The fit and finish was good, no alterations were needed.

In my opinion it's a very good pad.

Terry

22 November 2003, 00:15

Hillbilly Hunter

quote:
Originally posted by Trailblazer:
I've seen ads for these all over, and I'm wondering if they work as well as advertised. I'd like to put one on my CZ 550 in 9.3x62, but I'd like an opinion from my resident panel of experts first.

Any experience or advice will be appreciated.

I chose one for my Son's(8 year old)custom Contender rifle(22 target, 6.5/30-30, and 44 mag) christmas project. I don't know about durability, but they sure are "soft".

22 November 2003, 23:37

Boofhead

Installed a Limbsaver on my 45/70 guide gun.
With the original pad, a 400grn bullet at 2100fps would bruise my shoulder after 7 or 8 shots.

The Limbsaver turned my Marlin from a painful eye-popping experience into a weapon of mass enjoyment.

Cheers.

23 November 2003, 01:40

jeffeosso

the price is better than most...

feels tougher than a kickeez in regards to tearing...

might try one on a 416 taylor

jeffe

23 November 2003, 17:23

Boofhead

Correction to my previous post.
Should have read: 300grn at 2100fps.

Cheers.

23 November 2003, 17:34

browningguy

I put one of the slip-on pads on my 8mm light weight sporter and shot it today. Still a lot of muzzle jump but no more pains in the shoulder.

24 November 2003, 00:00

huntingcat

I put one on my .375. I took all the sting out of sighting in at a bench. The Limb Saver Pad is the only way to go. Look at the prefit pad dimensions on the Limb Saver website and chances are one of them will match your rifle's dimensions very closely.
Huntingcat

28 November 2003, 08:25

9x23w

Put a prefit on my Ruger 77 416. Fit was pretty good. Added a liitle to the LOP. Has more mass than most pads and seems to absorb the recoil well. I think their website has templates whic u can download to see if u can use any of the prefits. I saw one post that said they cannot be sanded down like normal pads. Also, the ones I've seem have a 'ribbed' design (not smooth like a decelerator) so I'm not sure how you could cut them neatly.

28 November 2003, 09:58

Atkinson

The best thing about a recoil pad is it gives the gun a one inch running start to the shoulder.

The second best thing about a pad is it is handy for standing a gun in the corner and it won't slip and fall.... [Big Grin]

29 November 2003, 14:06

Clark

This thread just cost me $22 + shipping

This is a recoil pad that claims to have a material more lossy than Sorbothane.
http://www.limbsaver.com/limbsaver/news/archive/navcomstory.aspx

I have looked at allot of graphs like that for EMI [electromagnetic interference] suppression, but the idea is the same for vibration. Get the vibration to stop transmitting energy.

What would that mean in a recoil pad?
The pad could push against the shoulder and then push away. There are no multiple cycles of the shoulder and pad vibrating.
What the pad can do is average the force over time by compressing, and then loose the energy and not push back hard.
Plain rubber averaged the force over time, but then gives back the energy when the rubber springs back.
As I understand it, the NAVCOM material would compress and then return to the extended position more slowly.
The material would have to heat up with lots of shots.

http://www.brownells.com/aspx/NS/Store/ProductDetail.aspx?p=18220&title=LIMBSAVER?%20GRIND-TO-FIT%20PADS
http://www.brownells.com/aspx/NS/Store/ProductDetail.aspx?p=13194&title=LIMBSAVER?%20RECOIL%20PAD

--
A society that teaches evolution as fact will breed a generation of atheists that will destroy the society. It is Darwinian.

29 November 2003, 15:48

Walker

Limbsavers come in pre-fit for a limited number of guns and grind to fit in 3 sizes for the rest. I got a pre-fit for a 700 BDL that was a pretty close fit after I sawed the buttstock flat. I have a grind to fit for a Ruger Red Label that I haven't installed yet. Cheaper Than Dirt had the best prices that I could find after you include shipping.