THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
CZ trigger to 10/22?
 Login/Join
 
one of us
posted
can the trigger assembly from a CZ 22 be mounted onto a 10/22?
 
Posts: 2286 | Location: Aussie in Italy | Registered: 20 March 2002Reply With Quote
one of us
posted Hide Post
you're kidding right? [Big Grin]
 
Posts: 248 | Location: Republic of Alberta | Registered: 04 April 2002Reply With Quote
one of us
posted Hide Post
well if it wsa easy, I would assume everybody would have tried it by now, but I have both rifles, and hardly ever use the CZ.

I can't get an aftermarket trigger here for the Ruger, and if I get one in from the States or UK it would cost me at least half what I paid for the rifle itself, a KID would cost nearly as much as the rifle...

I may be way off, but then again, I'm no gunsmith and that's why I'm asking here.

I suppose they are two completely different animals and there is no way to make them compatable?

I recall asking about modifying the Ruger trigger for a friend with a #1, and a member here Malm, wrote to me telling me he could fo it.

Maybe I should ask for his help?
 
Posts: 2286 | Location: Aussie in Italy | Registered: 20 March 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Express,
the ruger tuneup kit, drop in, would cost about 45 bucks, us... and someone to send it to you as a present. say, 60 bucks total, and it's drop in.

it can be done by just about any gun crank, or the old one CAN be tuned.. but a little too much, and well, you have an auto.

jeffe
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
Is that a trigger assembly or components for bettering the existing trigger?
 
Posts: 2286 | Location: Aussie in Italy | Registered: 20 March 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Express,

you could call midway 1800 308 3220 and tell them you want a trigger kit. trigger, spring, and if you want, sear

trigger is $22.08
http://www.midwayusa.com/rewriteaproduct/570649

The WHOLE 10/22 tuning kit is $125
http://www.midwayusa.com/rewriteaproduct/716391

and you just polish the sear, as it will be rough, with a cast line down the middle.

jeffe

[ 03-28-2003, 18:42: Message edited by: jeffeosso ]
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
new member
posted Hide Post
You might try Rimfirecentral.com. Any info that you want for a 10/22 will be there.
I doubt that the CZ trigger can be used, but if it can you will find out there.

Good Luck
 
Posts: 25 | Location: Alabama | Registered: 30 January 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia