The Accurate Reloading Forums
222 mag

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/351106588

03 July 2008, 00:10
keystone hog hunter
222 mag
have a 222 mag in a rem 721 action am insterested in changing over to 223.. cna this be acomplished without a re barell??? khh
03 July 2008, 00:26
butchlambert
Why would you want to do that? If you reload, everything is available and it is a better cartridge.
Butch
03 July 2008, 00:27
Cheechako
The 222 Rem Mag is a longer cartridge so you'd have to set the barrel back. I'd recommend at least .500" to be sure you get rid of the 222M neck.

But, check around first. An original 721 in 222 Rem Mag may be worth more than you think.

And also, listen to Butch.

Ray


Arizona Mountains
03 July 2008, 02:57
tin can
quote:
But, check around first. An original 721 in 222 Rem Mag may be worth more than you think.

good advice.
03 July 2008, 08:02
BAOkie
Wouldn't it be a 722 if were an original 222 Rem Mag? I don't remember any small face bolts for the 721.
03 July 2008, 15:22
eddieharren
If it is a 721, factory chambered with a small BF, and all original, it is worth way too much to alter in any way.
03 July 2008, 17:19
DMB
quote:
Originally posted by BAOkie:
Wouldn't it be a 722 if were an original 222 Rem Mag? I don't remember any small face bolts for the 721.


Right on.
721's were chambered in 270, 30-06 and 300 H&H Magnum.
Rem 722's were chambered in 222, 222 Mag, 244 (Thank you EddieSmiler)), 257 Roberts, 300 Savage (Thank you Alan GloreSmiler)), and 308 Win.
If there is a 721 with a small bolt face bolt in 222 Mag, I would think that it was a re-barrel job, not an original.

Don




03 July 2008, 17:24
DMB
quote:
Originally posted by keystone hog hunter:
have a 222 mag in a rem 721 action am insterested in changing over to 223.. cna this be acomplished without a re barell??? khh


Can't answer your question, however, I have two Rem 722's in 222 Rem Mag, and the accuracy I'm getting is excellent. You might want to consider leaving it as is, and keep its intinsic value.




03 July 2008, 18:05
Jim White
Whether it's a re-barrel or not it would be a shame to go to .223. The 222 mag is a far, far superior cartridge. What are your reasons for contemplating this change? Jim


99% of the democrats give the rest a bad name.

"O" = zero



NRA life member
03 July 2008, 21:25
wtb
If he doesn't reload,then the .223 would be a better round,as plenty of ammo at most any store,but i like the 222mag. better mostly because of the longer neck,hate that short neck on the .223,but i wouldn't change that 222 mag. if it were mine,but not a nickle worth of difference downrange between the two.Also the 722 was chambered in the 243.
04 July 2008, 00:57
keystone hog hunter
yes you all are correct it is a 722,,, gun has some senemental valuean i would like to use it more than i do,,,while i shoot several 223s it the only 222 mag and just trying to consolidate calibers,, thanks all,,,khh