The Accurate Reloading Forums
Rem 600 & rivetless extractor
Rem 600 & rivetless extractor
This is for a friend. Can a rivetless extractor be used on a 600 bolt with hole for rivet-type extractor? I think "yea", but what think you?
Guess no one knows. Used to be some knowledgeable gunsmiths here. The guy needs to know. Will try elsewhere, thanks.
15 June 2010, 02:16
WestpacThey're still around. If they are like me they are too busy repairing guns to be monitoring every post that hits the screen. The short answer to your question is "no".
_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
15 June 2010, 06:08
HeadacheGimpy,
Westpac is correct. The undercuts in the bolt faces are different between the riveted extractor and the rivetless extractor. The rivetless undercut looks more like Mickey Mouse ears while the riveted extractor bolt face has a more uniform/constant undercut and they are indexed a little different.
Headache
Thanks, Headache that's what he wanted to know.
Westpac, glad to hear you're so busy, I'll be sure to call someone else when I need some work done. The short answer was sufficient, the rest of your post you can gently insert where the sun don't shine.
20 June 2010, 09:48
Westpacquote:
Originally posted by Gimpy:
The short answer was sufficient, the rest of your post you can gently insert where the sun don't shine.
I'll be glad to but you will have to move your head first.
_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
TEE HEE, ya really got me there, Westpac, that was a good'n and so original, too...now don't you have some gunsmithing to do? Don't spend a lot of time here anymore, and now I remember why.
21 June 2010, 02:27
Jim Kobequote:
Originally posted by Gimpy:
TEE HEE, ya really got me there, Westpac, that was a good'n and so original, too...now don't you have some gunsmithing to do? Don't spend a lot of time here anymore, and now I remember why.
Are you by any chance an attorney?
Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild
21 June 2010, 02:43
butchlambertGimpy,
The reason he is busy is that he is good. He is a nice person, but doesn't suffer wise asses.
Butch
21 June 2010, 03:27
kcstottMaybe they call him gimpy cause the last Gunsmith he pissed off shot him in the foot.
Look Gimpy, You can't expect this forum to be at your beck and call. It don't work that way. It's not Tech support.
And the fastest way to not get any help is to tell someone to shove it??? Where the hell did that come from????
www.KLStottlemyer.comDeport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK
quote:
Originally posted by kcstott:
Maybe they call him gimpy cause the last Gunsmith he pissed off shot him in the foot.
Look Gimpy, You can't expect this forum to be at your beck and call. It don't work that way. It's not Tech support.
And the fastest way to not get any help is to tell someone to shove it??? Where the hell did that come from????
Just the usual ill mannered person who thinks that the world revolves around him. Ignore it.
Frank
"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953
NRA Life, SAF Life, CRPA Life, DRSS lite
21 June 2010, 09:16
craigsterquote:
Originally posted by Westpac:
quote:
Originally posted by Gimpy:
The short answer was sufficient, the rest of your post you can gently insert where the sun don't shine.
I'll be glad to but you will have to move your head first.
