The Accurate Reloading Forums
twist in Savage 22-250 model 110

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/347105902

17 February 2005, 03:13
voldoc02
twist in Savage 22-250 model 110
Would like to know the twist in a Savage HB varmit model 110 in 22-250 cal. and recommendations on max bullet wts. it will stabilize.
thanx much for info,
Doc Stone
17 February 2005, 03:43
dsiteman
Hello,
Probably a 14 and would prefer the weights of 50-60 grain, but you never really know for sure just how it will shoot until you do some experimenting at the range. You can take your cleaning rod, mark it in inches, note a mark at the top, put tight fitting patch/brush, etc. and push through bore and count the distance it takes to make one revolution. You can come pretty close to determining the twist. Just a suggestion.
Favor Center!!
dsiteman
20 February 2005, 03:53
PEI ROB
1 in 12. Probably won't stabilize much over 60grains, especially if they have a high BC.
20 February 2005, 05:05
ElCaballero
Ask these guys they are a wealth of info on savages. savage shooters forum


As a general rule, people are nuts!
spinksranch.com