THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Long Term Storage
 Login/Join
 
one of us
posted
I have made a minimum 2 year overseas commitment (Australia) and will not be able to take my firearms.

I am looking for recommendations on long term storage, not sure where to begin, what questions to ask or how to go about this. Any thoughts or sources of information are greatly appreciated. They are combination of wood, synthetic, blued, and stainless.

One option is to keep them in the safe at my fathers for the duration where they would get minimal if any care.

Kind Regards
Carl

P.s. Thanks in advance to all who offer to personally take on this task Smiler


Exercise makes you look good naked, so does bourbon.....You decide
 
Posts: 189 | Location: Was Kansas, USA - Now South Australia | Registered: 03 March 2002Reply With Quote
One of Us
posted Hide Post
Carl, if you protect them properly, they should not need any care during the period you are gone. I would opt for the safe at your fathers, install a goldenrod, give the metal (including the bore) a good coat of RIG and lock them up.


Chic Worthing
"Life is Too Short To Hunt With An Ugly Gun"
http://webpages.charter.net/cworthing/
 
Posts: 4917 | Location: Wenatchee, WA, USA | Registered: 17 December 2001Reply With Quote
One of Us
Picture of Rusty Marlin
posted Hide Post
I highly recomend a healthy coating of LPS3 or equivilant, they put them away and don't worry. This is a spay on grease/wax in a solvent base. I have had many guns stored for over a year in wooded crates that I treated with this. I just looked at some and they are FINE, a little slimy from the wax, but perfectly preserved.


Rusty's Action Works
Montross VA.
Action work for Cowboy Shooters &
Manufacturer of Stylized Rigby rifle sights. http://i61.photobucket.com/alb.../th_isofrontleft.jpg
 
Posts: 863 | Location: Northern Neck Va | Registered: 14 December 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
I was told years ago that for long term storage the way was to find a large length of PVC tubing and end caps. Put the gun in the tube and glue on the caps and drill a 3/8" hole in each end cap. Using one hole hold the tig torch to it to fill the tube with argon and then epoxy both ends shut. In this manner the oxygen was evacuated and the gun would not rust no matter where it was stored.

I've never tried this but if the idea serves you maybe it's worth a try.....


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of ElCaballero
posted Hide Post
Send them to me. I will take GOOD care of them while you are away.


As a general rule, people are nuts!
spinksranch.com
 
Posts: 2099 | Location: Missouri, USA | Registered: 02 March 2002Reply With Quote
new member
posted Hide Post
I use one of the Tilia food saver bag & seal units. I bought this thing years ago to package meat before putting it in my freezer. The film comes in 11.5†x 18’ rolls and I make a bag to fit the firearm. After removing the scope, I clean and lube the arm with Ballistoil and then put it in the bag and suck the air out.


Come to the Dark Side, we have cookies!
 
Posts: 15 | Location: MN | Registered: 26 November 2004Reply With Quote
one of us
Picture of Ol` Joe
posted Hide Post
I would do as Chic and wipe with Rigg grease and store them in the safe. Rigg was made for long term storage and works well. I`ve left rifles in my safe in the basement for over a year at a time with no sign of rust while useing it.


------------------------------------
The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray


"Why shouldn`t truth be stranger then fiction?
Fiction after all has to make sense." (Samual Clemens)

"Saepe errans, numquam dubitans --Frequently in error, never in doubt".



 
Posts: 2535 | Location: Michigan | Registered: 20 January 2001Reply With Quote
one of us
posted Hide Post
I agree with Chic on this one, though as long as the Goldenrod stays "on", the RIG is probably overkill. I would use Renaissance Wax.
 
Posts: 1366 | Location: Houston, TX | Registered: 10 February 2003Reply With Quote
One of Us
Picture of AZ Pete
posted Hide Post
The Rig 2 spray is good stuff too.


NRA Patron Life Member
 
Posts: 310 | Location: Arizona | Registered: 24 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia