THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Changing Sako 75 DBM to Floor plate set up ? Part to get rid of Key Concept ?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Changing Sako 75 DBM to Floor plate set up ? Part to get rid of Key Concept ?
 Login/Join
 
One of Us
posted
Read in my sinstruction manual that this can be done after purchase wondering where from and at what cost ? is it simple to do at home if you have the parts ?

Also is there an aftremarket part to rid this Sako 75 7mm STW of the Key Concept Contraption ?

Cheers PC
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
One of Us
Picture of 7mmMagnum
posted Hide Post
I remember ages ago i came across a company in the states that offered components to get rid of the crappy key concept.

I can't really remember the details but it was something along the lines of Accuflite or something like that. Maybe try google to see what it comes up with.
 
Posts: 152 | Registered: 29 January 2006Reply With Quote
One of Us
posted Hide Post
Thanks 7mm
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
One of Us
posted Hide Post
Call or email Sako .
 
Posts: 200 | Location: Calgary- Alberta- Canada | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Stonewall:
Call or email Sako .


cheers Stonewall
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
One of Us
Picture of SempreElk
posted Hide Post
quote:
Originally posted by PC:
Read in my sinstruction manual that this can be done after purchase wondering where from and at what cost ? is it simple to do at home if you have the parts ?

Also is there an aftremarket part to rid this Sako 75 7mm STW of the Key Concept Contraption ?

Cheers PC


I did it 2 years ago at a cost of 100 dollars shipped . All it involves is removing the bolt shroud/firing pin assembly and replacing it with the new unit. Purchased it directly from Beretta USA
 
Posts: 1779 | Location: Southeast | Registered: 31 March 2003Reply With Quote
One of Us
posted Hide Post
Thats what I will do,

cheers PC.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
Did same as SempreElk, for the Key concept elimination, I love the DBM, but I would try to get that direct from Beretta as well if I were wanting to do that conversion.

Good Luck--Don
 
Posts: 3563 | Location: GA, USA | Registered: 02 August 2004Reply With Quote
One of Us
Picture of SempreElk
posted Hide Post
quote:
Did same as SempreElk, for the Key concept elimination, I love the DBM, but I would try to get that direct from Beretta as well if I were wanting to do that conversion.

That is 440 dollars as per Beretta
 
Posts: 1779 | Location: Southeast | Registered: 31 March 2003Reply With Quote
One of Us
posted Hide Post
I want get rid of the key concept thing first it's pox.............then the floor plate assembly.

Thanks folks.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Changing Sako 75 DBM to Floor plate set up ? Part to get rid of Key Concept ?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia