THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Mounting a Holo Sight on a CZ 550
 Login/Join
 
One of Us
posted
My eyes are going. Does any one have a plan on fitting a holo sight on the CZ 550 Safari Mags?

Thanks,
Arniet
 
Posts: 374 | Registered: 11 March 2006Reply With Quote
One of Us
posted Hide Post
If you're referring to an EOTech holo sight, they mount using regular Weaver style bases.
I have two EOTech holo sights.

Don




 
Posts: 5798 | Registered: 10 July 2004Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
The smaller holo sights work well on rifles but will require some gunsmithing to fit well on a CZ. You want to be careful to mount it at the right height (neither too high or too low). Here is a perfect example of it done right on Rusty's Hollis double:



and in use:



You can have a small adapter made to fit the rear sight dovetail like Rusty's, or you could mount it on either receiver ring if you want it closer to the eye. Just be careful of the elevation relative to the comb so you don't have to adopt a poor head position. That will spoil all the fun.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia