Please provide a source for low QD Warne rings for CZ 550? Thanks.

VMA

You might try Warne directly.

Warne Scope Mounts

I've bought from them (drove over as the are local to me). They don't have the best prices when you buy direct. They don't want to compete with thier customers (i.e. retailers).

They might also be able to tell you who else you can buy from who is more local or competative.

Take Care,

-Steve

i got mine from brownelles.

www.brownelles.com

VMC,

I have a set sitting around. If you are interested I will measure their height.

jim dodd

Mr.HunterJim,
Please do, if they are the low lever/QD I'm interested. Thanks.

VMA,

They are the Warne lever type. I will measure them and let you know.

jim

As far as I knew, Warnes does not manufacture the lows, only medium height. I believe the construction was not so strong. I hav a low that is broke. Now I have the new medium on my 375.

Johan

Mr. Hunter Jim,
Appreciate the assistance and effort, but found the rings at a local gun shop. Apologized for any inconvenience I might caused. Thanks.

Johan,
You are correct,Warne does not manufacture the lows, only medium height.

VMA

VMA,

These are Warne 1"/Med/Matte Blue #6001BADL BRNO 19mm rings.

They were the lowest ring Warne made when I got them in about '94, and it looks like they don't make anything lower from what Johan says. I tried them, but they were too low to allow the 1.5-45.X20 Swarovski's rear to clear the bolt handle. I figured I would keep them just in case I used another scope, but I am converting that rifle to iron sights only (with the Brockman Gen III sights).

jim dodd