THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    What are the dimensions of a .223 Rem match reamer

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
What are the dimensions of a .223 Rem match reamer
 Login/Join
 
one of us
posted
I am looking for a .223 reamer, but I am too cheap to pay for a custome smaller reamer.
Is the .223 match smaller like a 308 Palma?
 
Posts: 2249 | Registered: 27 February 2001Reply With Quote
one of us
posted Hide Post
Have the reamer maker of your chaice send a print of their sami specs 223 reamer and their "match" reamer specs. A comparison of the drawings will answer your question.


www.duanesguns.com
 
Posts: 869 | Location: N Dakota | Registered: 29 December 2003Reply With Quote
one of us
posted Hide Post
Thanks for the response.
I have SAAMI dimensions and tolerances here for .223 Rem cartridges and chambers, but I have no info on ".223 Remington match", which Midway sells:
http://www.midwayusa.com/rewriteaproduct/938161

and they do not distinguish it from thier ".223 Remington":
http://www.midwayusa.com/rewriteaproduct/494920
 
Posts: 2249 | Registered: 27 February 2001Reply With Quote
one of us
posted Hide Post
Midway is sell Elliot Tool Company and PPG reamers, I would contact Midway and find out whose tool is the Match reamer. You want to ask about the throat specs- most will be set up for 75-80 gr bullets.
 
Posts: 869 | Location: N Dakota | Registered: 29 December 2003Reply With Quote
one of us
posted Hide Post
I want to go in halves with my brother on the reamer.
He has a Douglas XX 1 in 16" barrel.
I have a Lothar Walther 1 in 14" barrel.
We do not want an 80 gr bullet throat.

I sent Midway and email asking them, but that is like calling my mother.
 
Posts: 2249 | Registered: 27 February 2001Reply With Quote
one of us
Picture of z1r
posted Hide Post
FYI,

Both those are PTG.
 
Posts: 4867 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
one of us
posted Hide Post
Senor Clark,
Listen to this hillbilly and save yourself some heartache. Send an e-mail to or call Dave Kiff at PTG http://www.pacifictoolandgauge.com/index.asp
Tell him what you want to do. Wait 8 weeks. When the reamer arrives it will be perfect.
JCN
 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
one of us
posted Hide Post
Since when did David Kiff take 8 weeks to deliver a reamer? I've never waited more than 3. Aside from that, Clark, I would call Kiff and order the reamer you want. Get some Lapua brass, seat a bullet and measure the neck, unturned. Then order the reamer with no more than .002" over that dimension. And, the throat diameter should be around .2245". Since you are wanting a "match" reamer, I assume you would use the best brass, and have the reamer mated to Lapua brass.
 
Posts: 142 | Registered: 11 March 2004Reply With Quote
one of us
posted Hide Post
I wrote to Midway:

Quote:

Hi,

I want to buy a .223 reamer and would like to get one that is tighter than SAAMI specs.

I have a copy of the SAAMI dimensions for .223 Remington, but I do not have any information on your product:



http://www.midwayusa.com/rewriteaproduct/938161

Which is ".223 Remington Match"



I would like to find out how that product differs dimensionally from your standard .223 Remington reamer:

http://www.midwayusa.com/rewriteaproduct/494920








Midway got back to me. I could have just called my momSmiler



Quote:

Dear Mr. Magnuson,

Thank you for your recent email. Unfortunately, we do not have any products that are tighter than SAAMI specs, they would have to be modified to fit your needs. Here is the phone number to Remington 1-800-243-9700 they maybe able to help you further.

If you have any further questions or comments feel free to contact us at 1-800-243-3220. Our office hours are Monday through Friday 8 am - 8 pm and Saturday and Sunday 9 am - 5:30pm (CST). You can also visit us anytime at MidwayUSA.com.



Your feedback is extremely important to us, it fuels our commitment for continuous improvement and customer satisfaction. Once again, thank you for choosing MidwayUSA, we appreciate the opportunity to serve you!







Sincerely,



Jeannie

MidwayUSA

Customer Service Associate

PS. Have you received our latest Master Catalog #2 with over 40,000 products? Call or log on today!


 
Posts: 2249 | Registered: 27 February 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    What are the dimensions of a .223 Rem match reamer

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia