THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
pre64 M-70 fiberglass stock for drop magazine
 Login/Join
 
one of us
posted
Who makes a fiberglass stock for a standard length pre64 M-70 with a drop magazine (hold four 375 Ruger rounds down)?

I know McMillan does not make one.


Anyone else make one?


Thanks
 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
One of Us
posted Hide Post
Micky will inlet tbe "Safari" model for the P-64, or so Dick Davis told me a couple years ago.
 
Posts: 2366 | Location: "Land OF Shining Mountains"- British Columbia, Canada | Registered: 20 August 2006Reply With Quote
One of Us
posted Hide Post
I think they do offer one; I know I built one on there stock a while ago and it had the drop box. Can't remember who I built it for though.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
MHC_TX Here goes with an idea...mill out the "lip"in the action that positions the facory sheet metal magazine box.

Then make up a new box (wider),,just butt it up against the bottom of the action (this is not rocket science)

Bet a big mac that it will hold four rounds down with standard depth.


Gotta check the math, but I think it will do the trick..

Oh..."checking the math" means making up a model. If anyone else has done this aleady, let me know
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia