THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
bore/groove diameter
 Login/Join
 
vapodog
One of Us
Picture of vapodog
posted
can anyone tell me the bore and groove diameter of a 20 ga slug barrel?


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
dpcd
One of Us
Picture of dpcd
posted Hide Post
.615, +.020 is the SAAMI bore diameter. Which has nothing to do with rifled barrels.
I would ask the maker as, as you can see, the tolerance is quite generous for shotgun barrels.
 
Posts: 17442 | Location: USA | Registered: 02 August 2009Reply With Quote
vapodog
One of Us
Picture of vapodog
posted Hide Post
quote:
I would ask the maker

Thanks for the reply.....I'll see if I can get the data from Mossberg or someone else.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
The Dane
one of us
Picture of The Dane
posted Hide Post
 
Posts: 1102 | Location: Denmark | Registered: 15 October 2001Reply With Quote
dpcd
One of Us
Picture of dpcd
posted Hide Post
This chart gives no tolerances and is not for rifled barrels. Nice chart otherwise.
Ask the barrel maker as SAAMI does not spec rifled shotgun barrels.
 
Posts: 17442 | Location: USA | Registered: 02 August 2009Reply With Quote
h2oboy
One of Us
Picture of h2oboy
posted Hide Post
I will have to verify this but I believe .613 bore and .620 groove is what mine are.


Dirk Schimmel
D Schimmel LLC
Dirk@DoubleRifles.Us
1-307-257-9447

Double rifles make Africa safe enough for bolt guns!
 
Posts: 495 | Location: Gillette,Wyoming | Registered: 16 May 2007Reply With Quote
h2oboy
One of Us
Picture of h2oboy
posted Hide Post
Ok, I have one set that is .613 bore and .620 groove. The second set is .615 bore and .624 groove. Both sets are 1-24 twist.


Dirk Schimmel
D Schimmel LLC
Dirk@DoubleRifles.Us
1-307-257-9447

Double rifles make Africa safe enough for bolt guns!
 
Posts: 495 | Location: Gillette,Wyoming | Registered: 16 May 2007Reply With Quote
vapodog
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by h2oboy:
Ok, I have one set that is .613 bore and .620 groove. The second set is .615 bore and .624 groove. Both sets are 1-24 twist.


thank you


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia