Value of 1910 Mexican actions

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/3021003232

26 May 2017, 02:13

Glen71

Value of 1910 Mexican actions

Wondering what 1910 actions are worth these days. I have a couple or three in the safe and are not going to get around to building anything with them. One of the receivers has been annealed by PacMet.

26 May 2017, 02:56

ColoradoMatt

I don't know what they are worth, but I will say that finding good bolts, extractors, and bolt guts, is very difficult. I ordered a couple of bolt from Numericks a couple years ago, and they both looked like they had been recently separated from a coral reef! Anyway, I think NICE Mexican actions are getting to be hard to come by.

Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."

26 May 2017, 05:58

jeffeosso

unfuddlewith? 300-500, depending .. with cocking piece bolts, 100 more

opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com

26 May 2017, 06:46

Glen71

For sure bolt parts are hard to come by.

29 July 2017, 05:47

Gary MacDonald

I've got a dozen or 2 Mexican 1910 and 1936 bolts , stripped . But my solution is to use intermediate Mauser bolts with common extractors and firing pin assemblies , using thes require a cut on the barre similar to a Rem 700 . The intermediate bolts have the bolt face even with the inner c collar and the extractor and opposing tits protrude . It works excellent and adds a only a little more cutting .