THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Pulling a lock tighted muzzle brake ?
 Login/Join
 
easyup
one of us
posted
Anything special? Think heating with an industrial hot air blower and unscrewing will work?
Thanks
 
Posts: 206 | Location: Tucson, AZ, USA | Registered: 26 December 2001Reply With Quote
CDH
one of us
Picture of CDH
posted Hide Post
Heat softens loctite really well. I use a propane torch though...I am not sure a hot air blower will transfer enough heat into the barrel metal to get you there.
 
Posts: 1780 | Location: South Texas, U. S. A. | Registered: 22 January 2004Reply With Quote
D Humbarger
one of us
Picture of D Humbarger
posted Hide Post
if your talking about the blowers that are used to loosen flooring tile then it should work. Those things get really hot!
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
Fish30114
one of us
posted Hide Post
Have used a regular old Porter Cable heat gun many times and it has done the trick.
Good Luck--D.
 
Posts: 3563 | Location: GA, USA | Registered: 02 August 2004Reply With Quote
shortshot
one of us
posted Hide Post
All locktites liquify at 300*F.
 
Posts: 85 | Location:  | Registered: 25 March 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia