The Accurate Reloading Forums
Pilkingtons stain

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/289103748

09 April 2008, 02:42
GSP7
Pilkingtons stain
Is Pilkingtons english red a Alcohol base stain?
09 April 2008, 04:42
Dr.K
Yes as far as I'm aware of does it say Spirit stain ?.Which is a Aniline Powder Stain (Dye Type) If so it is . They are solvent soluble stains Lacquer ,Alcohol , and several other solvents .

Go here and see what some professional wood finishers use . I like their stuff as it's TOP quality and complete systems for doing WHAT EVER wood type finishing one has in mind .Except floor finishes then I use Bona Kemi products .

www.mohawk-finishing.com/catalog_browse.asp?ictNbr=23


Shoot Straight Know Your Target . ... salute
09 April 2008, 08:41
Duane Wiebe
I tried this stain ONCE...soon as I applied "Ship n' Shore Sealer" it all washed away
09 April 2008, 09:01
TC1
Which one Duane, the Pilkingtons or Mohawk?

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
09 April 2008, 09:32
delloro
yes they are alcohol based, but xylyl alcohol. not the methyl, ethy, and isopropyl we are used to seeing.
09 April 2008, 17:51
<xs headspace>
Seems like I remember trying to dilute the Pilkington's Pre 64 red, and finding out I had to use Xylene to cut it. Works nicely on bare wood, but touching up over a finish will get somewhat dissolved by the next coat of finish. Depends on what the solvent is in the finish.
10 April 2008, 07:43
Duane Wiebe
The bottle says "classic spirit stain" and in handwriting "English Red" and is marketed by the Pilkinton Gun Company. Careful with Xylene...this stuff will turn your liver into a door stop..VERY dangeous chemical!
10 April 2008, 08:33
GSP7
Duane, if Pilkingtons washes off, what do you recommend for a redish stain?

I saved this link that someone posted. Anyone tryed this crap stuff?

http://www.rockler.com/product.cfm?page=11448

Alkanet root dye?http://www.naturalpigments.com/detail.asp?PRODUCT_ID=455-12S
10 April 2008, 17:06
Marc_Stokeld
The root link is just for the root. You need to make the stain using th eroot. It takes about 6 months to really set up. it can be used earlier but seems to get better and better with age. 6 months has show me to be the soonest of the goodest results. 2 months is the minimum brew time.

I have many hundred dollars sunk into finsih and stain compnenets. There are tons of recipies and each piece of wood responds differently to different recipies. I have one thta is good for my eye over a wid erange, so that is what I like.

You can go to

DoubleGunshop.com

and search for "alkanet root stain" and similar words. This has been beaten todeath on th eboard with over a hundered pages on the topic of traditional stains and finsihes. So a couple of searches will fix you up.

FWIW, I do not like the Pilkington's English Red stain. I always got a better stain on my fingers than I could get on the wood. I went through 3 bottles and was only happy with one stock. And even it was not the look I was after. Could very well have been that my various application and finishing methods did not jive with it. I don't know, but I got tired of trying to get it to work for me.
10 April 2008, 22:09
Dr.K
Re Read my original post .

Professional means just that . major Furniture manufactures use that stuff . Washing off isn't an option . Staining wood is some what of an art .
Like stock making is or gunsmithing is Etc. .

If one experiences a Washed out or diluted dye color when sealing , try a slightly darker application of stain .Then wipe with a solvent to get what color your looking for and set the stain . Then seal with an appropriate sealer which WILL NOT LIFT .

There isn't a color which can't be matched with Mohawk Products , from Antique Museum pieces to your project.

Wear latex or better Nitrile gloves when working with Chemicals , your fingers will appreciate it not to mention your Wives !.

Shoot Straight Know Your Target . ... salute
11 April 2008, 06:00
Duane Wiebe
Alkenet root is a spice...well, no taste, just adds red color You can get it from Yankee Grocery, Hamden CT FAX 203 776 1089
12 April 2008, 00:42
yeti
GSP,
You can try Behlens Solar Lux Blood Red. It works for me. Analine based and I think MEK is the carrier solvent.
12 April 2008, 04:51
GSP7
Thanks Yeti and SDH, Behlens Blood Red looked like a good "experiment". Found a local wood finish supply that has Behlens stains to play with.
12 April 2008, 17:11
yeti
BTW, I use the Blood Red to tint toward red, if it's a light chunk of wood, the Red stain will leave a pinkish tone. Like you said - experiment!