THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Pre-64 M70 Bolt and Stock work
 Login/Join
 
One of Us
posted
I picked up a pre - 64 Winchester Mod 70 in .270 cal. Couple of questions. Were these bolts jeweled? Also looking for someone to restore the stock.


US Navy RETIRED
NRA LIFE MEMBER
 
Posts: 526 | Location: Seattle | Registered: 17 June 2010Reply With Quote
One of Us
posted Hide Post
Only the supergrades were jewelled, I believe. Does it have the "Super Grade" logo on the bottom metal?


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
that would be sweet, but no, no logo. The stock is in excellent condition considering it's age with one problem. It was left standing on a concrete floor so buttplate is in poor shape due to rust and pitting. There is some discoloration at the heel but wood is solid.


US Navy RETIRED
NRA LIFE MEMBER
 
Posts: 526 | Location: Seattle | Registered: 17 June 2010Reply With Quote
One of Us
posted Hide Post
Another question. The rifle is a 1953 standard grade and came with two stocks. One has a checkered metal buttplate and the other has an aftermarket pad. Which would be correct, a metal plate or pad?


US Navy RETIRED
NRA LIFE MEMBER
 
Posts: 526 | Location: Seattle | Registered: 17 June 2010Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
Metal plate with "widow's peak".


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
One of Us
posted Hide Post
thanks


US Navy RETIRED
NRA LIFE MEMBER
 
Posts: 526 | Location: Seattle | Registered: 17 June 2010Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia