The Accurate Reloading Forums
Info on J.P. Sauer Mauser

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/24910504

01 October 2001, 14:02
Ed
Info on J.P. Sauer Mauser
I bought the subject rifle and need a bit of help. It has a half octagon, half round 25.5" integrally ribbed (front site too?)barrel originally in "30.U.S.G.1906" caliber that has been rebored/chambered to 35 Whelen. There is a swivel stud out on the barrel and a spoon type bolt handle. The rear site has one fixed and two folding leafs. The stock is very fancy walnut with raised panels near the mag well, schnabel forend, very fine checkering on the pistol grip only, steel grip cap, gold monogrammed inlay and what looks like a some type of horn for a butt plate. Also, there is a "pin-like" piece that crosses through the forearm, I assume through "lug" in the barrel. The floorplate has a lever release and it has double set triggers. The rifle is in mint condition and shoots very well. What can you tell me about this rifle? When was it made, how many, quality, etc. Thanks in advance.
01 October 2001, 18:44
<martin f>
Ed,

congratulations! You have a pre-WWII top quality rifle with all the expensive extras (like integral rib, half round/octagon barrel), and probably a commercial Mauser system.
For more detailed information, you first should locate serial numbers (they should be on the barrel and action, possibly on the bottom side) and any other markings.

Then contact www.gunmaker.org, The Gunmaker Forum (this is the website of the gunmakers of Suhl).
You might also try to contact Sauer, at www.sigsauer.de

Regards, Martin

01 October 2001, 23:39
Fritz Kraut
Try to write a mail to Mrs. Hammes at Sauer: Hammes@sig-sauer.de I recently wrote some questions about my Sauer drilling, and after a day or two I had a response.

Seems to be a real beauty you�ve got in your hands! Be careful with her and resist all temptations of customizing her.
Please post some pic of her - we are greedy to se her!

Fritz K.

02 October 2001, 07:19
Atkinson
Not an uncommon gun, but the price is going up better than prime stock...

I have 2 of them, made around 1920 to 30..one in 9.3x62 and another in 10.75x68.
If the action is commercial it will have an M behind the recoil lug. comm or mil are both equal in quality...

------------------
Ray Atkinson

ray@atkinsonhunting.com
atkinsonhunting.com