THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
QD ring question
 Login/Join
 
One of Us
posted
I am working on putting a set of scope mounts on my Pedersoli Kodiak rifle and need a set of rings. I was planning on using Warne bases with the Warne QD rings, but according to them (Warne)it takes at least one full turn of the lever to remove them so the lever would not pass the barrels. Does anyone know of a set of QD rings that would work? I'm somewhat at a loss as to what would work. bewildered


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
 
Posts: 1513 | Location: Camp Verde, AZ | Registered: 13 December 2005Reply With Quote
One of Us
posted Hide Post
The levers on Warne's are adjustable. You can turn them as much as you can (1/2 or 1/4 turn) and pull them out and reset them to continue turning to release the scope. Not a problem at all. Just will take a few seconds longer .


Hang on TITE !!
 
Posts: 582 | Registered: 19 August 2004Reply With Quote
One of Us
posted Hide Post
That makes sense, thanks thumb


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
 
Posts: 1513 | Location: Camp Verde, AZ | Registered: 13 December 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia