THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Finsihed project, 400 Tembo
 Login/Join
 
Jim Kobe
One of Us
posted
Just completed this one. It was done on a MRC action modified by Evolution USA in Idaho. It is one of their proprietary calibers, 400 Tembo, a shortened 404 Jeffery I believe. The wood was a select blank from Dressel's. It has been rust blued and was built from the blank. The engraved grip cap and checkered bolt knob was done by Jerome Glimm and welded on by me.

Enjoy, Jim


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5521 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
michaelj
One of Us
posted Hide Post
Very Nice Jim.

Michael J


Michael J
 
Posts: 485 | Location: Lakewood Colorado | Registered: 17 February 2008Reply With Quote
srtrax
One of Us
Picture of srtrax
posted Hide Post
Looks good... thumb


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
cmfic1
One of Us
Picture of cmfic1
posted Hide Post
Very nice Jim.....I love browsing these threads!


Rod

--------------------------------
"A hunter should not choose the cal, cartridge, and bullet that will kill an animal when everything is right; rather, he should choose ones that will kill the most efficiently when everything goes wrong"
Bob Hagel
 
Posts: 977 | Location: Alberta, Canada. | Registered: 10 May 2005Reply With Quote
Von Gruff
One of Us
Picture of Von Gruff
posted Hide Post
The fitting of the fore end tip is a superb touch.

Von Gruff.


Von Gruff.

http://www.vongruffknives.com/

Gen 12: 1-3

Exodus 20:1-17

Acts 4:10-12


 
Posts: 2693 | Location: South Otago New Zealand. | Registered: 08 February 2009Reply With Quote
Dall85
One of Us
posted Hide Post
Jim,

A truly great work of art and science! You are a master!


Jim
 
Posts: 1206 | Location: Memphis, TN | Registered: 25 January 2008Reply With Quote
Doc224/375
One of Us
posted Hide Post
Excellent Jim !. thumb archer archer archer

I wish you would place the bolt on the correct side of the receivers though , your giving us

lefty's a complex !. jumping
 
Posts: 4485 | Location: Planet Earth | Registered: 17 October 2008Reply With Quote
fla3006
one of us
Picture of fla3006
posted Hide Post
Very nice !


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
eurocentric
One of Us
posted Hide Post
Jim I very interested in this as well, its a caliber I have been thinking about for over a year now. Did you have to provide a rifle? I have a beautiful CZ in 375 H&H. Regards
 
Posts: 2268 | Location: Westchester, NY, USA | Registered: 02 July 2007Reply With Quote
Jim Kobe
One of Us
posted Hide Post
The client furnished the barreled action; it was done up by Evolution USA. I did the sights.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5521 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia