THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Heat treating Mausers
 Login/Join
 
vapodog
One of Us
Picture of vapodog
posted
This Link is about the best I've ever read on Mausers and heat treating
It's very helpful to understand the situation and a good read for anyone building a gun on a Mil-surp Mauser action.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
skl1
one of us
posted Hide Post
Thanks, Vapo.

Great thread. I've been looking for info just like that. On my "to be researched" list.

Have there been any discussions on modern actions that have been milled? I'd imagine the new ones are hardened all the way through?

So do you still re-heat treat a new CD Mauser if you open the bolt face or re-cut the threads or chamfer the receiver shoulder?

How about Winchesters and Remingtons?

Steve
 
Posts: 1734 | Location: Maryland | Registered: 17 January 2004Reply With Quote
mete
one of us
posted Hide Post
Old Mausers were made of low carbon steel and had to be carburized to get the necessary strength.New rifles are typically made from Chrome-Moly [4140] which doesn't need carburizing as it is strong enough.
 
Posts: 7636 | Registered: 10 October 2002Reply With Quote
vapodog
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by skl1:
Thanks, Vapo.

Great thread. I've been looking for info just like that. On my "to be researched" list.

Have there been any discussions on modern actions that have been milled? I'd imagine the new ones are hardened all the way through?

So do you still re-heat treat a new CD Mauser if you open the bolt face or re-cut the threads or chamfer the receiver shoulder?

How about Winchesters and Remingtons?

Steve


IMO the new actions (CD) are thru hardened and don't require any he heattreat after machining.

This is also true (IMO) of M-70 and M-700 etc....


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
vapodog
One of Us
Picture of vapodog
posted Hide Post
here's more data on heat treating

I'm hoping some of this is helping and not causing worse confusion.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia