The Accurate Reloading Forums
What barrel length 250-3000?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/2181002761

26 November 2011, 21:10
butchlambert
What barrel length 250-3000?
I have a Shilen #2 contour barrel in the lathe. It will be screwed on a small ring mauser. What length would look best? I think all of the lengths will shoot fine. 22"-23"- or 24"?
Butch
26 November 2011, 21:47
lb404
I have 5, 3 with 24", 2 with 22". With iron sights i like22", plain barrel i like 24". Either way they are fine shooters if you have a 1:10 twist rather than a 1:14-1:14 twist of the original guns.


square shooter
26 November 2011, 21:54
butchlambert
Thank you. I'm leaning toward the 22" length and mine is a 10" twist.
Butch
26 November 2011, 23:09
butchlambert
Just sawed it off at 22". I will crown it and quit for the day.
Butch
01 December 2011, 23:36
Atkinson
20 to 22 inches screams for a small ring action.

For me it would be 18 or 20 inches for a Manlicher rifle and 22 inches for a rifle.

I love the caliber and as far as killing power goes any barrel length works great..

The little 250 isn't a hotrod and its kind to bullets thus it kills way out of porportion to its balistics.

I would use a 1x10 twist..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
01 December 2011, 23:57
Tentman
Ha - you won't go wrong with 22, my Mauser Kurz that I recently rebarreled was 20 but I felt was a bit too short as a "rifle".

The new barrel is profiled off another 250-3000 Kurz I have (original with open sights only) , is 21 3/4" and very slim, but it handles and balances like a dream.

When you stock it just hollow out the buttstock until you get it balanced at the front reciever screw - adjust it again after its wearing its final scope.
02 December 2011, 04:11
butchlambert
I will need to find some brass. This is all I have at this time.



Butch
02 December 2011, 05:00
mike cockcroft
Butch
I have two 250-3000 and one 250AI. I would never sell any of them. All the pictures of my kids hunting when they first started out have one of these rifles in the picture. I gave the 250AI to my daughter and she loves it.
Mike
02 December 2011, 05:12
butchlambert
Hey Mike,
How is your new long range shooting range going. Looks like you have a first class place.
Butch
03 December 2011, 04:33
mike cockcroft
Hello Butch
Range is up and running. Have 15 benches now, will decide after this spring if I am going to add any more. We will be having the East Texas Championship 400 yd clay bird match next May and the NBRSA 600 yd State Championship in June. Hope to throw in a few matches before then. I dont have the time or help to do very many matches a year.
Mike