THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Bolt disassembly
 Login/Join
 
new member
posted
I have heard it is a simple process, but how do you field strip a model 70 bolt (push feed)?

Additionally, how do you replace the extractor?

Thanks for any input!

T
 
Posts: 3 | Registered: 15 January 2006Reply With Quote
one of us
posted Hide Post
TMA, Put the safety in the middle position and remove from action. Push in the shroud catch on the left side and unscrew the shroud and firing pin.

I forget exactly how to stip a push feed extractor...............DJ


....Remember that this is all supposed to be for fun!..................
 
Posts: 3976 | Location: Oklahoma,USA | Registered: 27 February 2004Reply With Quote
Moderator
Picture of T.Carr
posted Hide Post
See if this helps

Bolt Cleaning

Regards,

Terry



Msasi haogopi mwiba [A hunter is not afraid of thorns]
 
Posts: 5338 | Location: A Texan in the Missouri Ozarks | Registered: 02 February 2001Reply With Quote
new member
posted Hide Post
Thanks for your help dj and T.Carr!
 
Posts: 3 | Registered: 15 January 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia