THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
pre chambered barrel
 Login/Join
 
One of Us
posted
My local smith doesn't have a reamer for a 6x223. Can I order a barrel already set up for this caliber, then just screw the barrel onto the action? Sorry if this seems very basic to some, but I don't really know. Gary
 
Posts: 469 | Location: central California | Registered: 26 October 2006Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by GaryG:
My local smith doesn't have a reamer for a 6x223. Can I order a barrel already set up for this caliber, then just screw the barrel onto the action? Sorry if this seems very basic to some, but I don't really know. Gary


If it were only that simple... It would still need to be fitted and headspaced. If he has any experience installing barrels he can rent the reamer and do the job himself.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
One of Us
posted Hide Post
I did not know that renting a reamer was possible. He told me that he would have to buy one, $100-$150.
 
Posts: 469 | Location: central California | Registered: 26 October 2006Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by GaryG:
I did not know that renting a reamer was possible. He told me that he would have to buy one, $100-$150.


This outfit lists the 6x45 Ackley reamer, but you will have to call them to see if they have the straight up 6x45 reamer.

http://4-dproducts.com/display...group=Rifle+Calibers


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
These folks rent reamers also.

Elk Ridge reamer rentals



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
posted Hide Post
Thank you all for your help! Gary
 
Posts: 469 | Location: central California | Registered: 26 October 2006Reply With Quote
One of Us
posted Hide Post
I've got a Clymer 6 x 223 reamer, It's marked strangely (6mm-TM) but measures out as a standard 6x223. I've always wondered how it would work, but haven't been curious enough to get a set of dies and see if they size a case to match the reamer. I got it with another reamer similar, that's marked 25 cal TM.

I keep thinking I should contact clymer and ask for a reamer print, but never remember to do it.

dave
 
Posts: 1120 | Location: Eastern Oregon | Registered: 02 December 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia